When to change your POA-LMP90 projector lamp

Sanyo POA-LMP90 (service part no 610 323 0726)Your Sanyo POA-LMP90 (service part no 610 323 0726) projector lamp has between 2,000 to 3,000 hours before it needs to be replaced. This may be less if your filters are not cleaned on a regular basis.

Projectors using Sanyo POA-LMP90 (service part no 610 323 0726)

 

Sanyo_Video_Lamp_ReplacFor additional savings and an enviro-friendly option, you can just replace the Sanyo POA-LMP90 (service part no 610 323 0726) bulb and re-use the lamp cage. Learn how in our video guide: Sanyo POA-LMP90 replacement lamp housing guide.

Be sure to use the correct brand projector lamp bought from a verified source that has been manufactured to meet the specifications of your projector.

Resist the temptation to buy a cheaper counterfeit model as this can damage the sensitive mechanisms in your Sanyo projectors.

See below for the step-by-step instructions on replacing the Sanyo POA-LMP90 (service part no 610 323 0726) lamps for Sanyo projectors listed above.

Sanyo Lamp Replace Indicator

PLC-SU70/PLC-XU73/PLC or PLC-XE40/PLC-XE45 or PLC-XU74 or PLC-XU83/PLC-XU86 or PLC-XU84/PLC-XU87 Lamp replacement indicator
Lamp replacement indicator

As the lamp reaches its end of life, the Lamp Replace indicator lights turns yellow and starts to blink.

When the lamp life is used up and at 0 hour, the Lamp replacement icon will appear on screen, indicating that is it’s urgent to replace the Sanyo POA-LMP90 (service part no 610 323 0726) lamp.

PLC-SU70/PLC-XU73/PLC or PLC-XE40/PLC-XE45 or PLC-XU74 or PLC-XU83/PLC-XU86 or PLC-XU84/PLC-XU87 lamp repalcement icon

You must wait for 90 seconds after changing Lamp Mode before you can access this option again.

Click on your Sanyo Projector for step-by-step instructions on replacing your Sanyo POA-LMP90 (service part no 610 323 0726) lamp

Sanyo PLC-XL40, Sanyo POA-LMP90 (service part no 610 323 0726)

Sanyo projector PLC-XL40: Click here for step-by-step instructions on how to change the Sanyo POA-LMP90 projector lamp for projector Sanyo PLC-XL40.

 

 

Sanyo PLC-XE40 projector, Sanyo POA-LMP90 service part no 610 323 0726

Sanyo projector PLC-XE40: Click here for step-by-step instructions on how to change the Sanyo POA-LMP90 projector lamp for projector Sanyo PLC-XE40.

 

 

Sanyo projectors PLC-XU84/PLC-XU87, Sanyo POA-LMP106 (service parts no 610 332 3855)/ Sanyo POA-LMP90 (service part no 610 323 0726)Sanyo projector PLC-XU83/PLC-XU86: Click here for step-by-step instructions on how to change the Sanyo POA-LMP90 projector lamp for the Sanyo PLC-XU83/PLC-XU86 projector.

Leave A Comment?