The affordable solution to white dot syndrome on your DLP TV

DMD DLP chip 4719-001997 projector TVWhite dots, white snow or sparkling stars on your DLP TV mean only one thing – a worn out DMD chip. The white dot syndrome seems to happen when the DLP TVs have been in use anywhere from two to five years – usually when the warranty has expired

Certain brands seem more vulnerable than others to the white dot syndrome. Samsung and Mitsubishi DLP TVs have been plagued with the problems for several years now. Sony and JVC choose to take the TVs set off the market in response to complaints from disgruntled owners.

If you read the various forums offering solutions, you’ll see customers being given quotes of $600 and upwards for solving the white spot syndrome or replacing the DMD DLP chip. Fortunately, there are companies offering the offering the DLP chip for under $230.

Causes of DLP white dot syndrome

At the heart of every DLP TV, no matter what the brand is the DMD chip invented in 1987 by Dr. Larry Hornbeck of Texas Instruments. This optical semiconductor contains an array of up to 2 million hinge-mounted microscopic mirrors, so small they measure one-fifth the width of a human hair.

The DMD chip receives the digital or graphic signal reflecting it onto the TV screen to produce the stunning images that have made these TVs a frontrunner for the consumer.  The mirrors themselves are made out of aluminum and mounted on a yoke with an axle that literally twists in the middle. The DMD micro mirrors switch on and off, either tilt towards the light or away from it.

DMD DLP Chip technology
DMD DLP Chip technology

This action creates the light or dark pixels on the screen and allows for a staggering 1,204 shades of gray.  At the same time, the DLP lamp generates white light that passes through a red, green, and blue color filter to the surface of the DMD chip creating millions of colors.

DLP white dot syndrome happens when one of these micro mirrors gets stuck and can no longer reflect the signal. The result is a white or black dot on the screen. As more and more mirrors become stuck, more white dots appear on screen creating an image that can’t be viewed.

The affordable solution

In order to address the issue, Texas Instrument has created a replacement DMD DLP chip that is affordable and readily available from recognized distributors. While part numbers may vary, the chip remains the same. The following part numbers are interchangeable:

Samsung DMD Chip 4719-001997 
Samsung DMD Chip 4719-001985
Samsung DMD Chip 4719-001999
Samsung DMD Chip W1272-5003
Mitsubishi DMD Chip 276P595010
Board Number DMD Panel IC# 1910-6143W
Board Number DMD Panel IC# 1910-6145W
Board Number DMD Panel IC# 1910-6103W

Avoid an expensive repair bill and keep your customers happy by purchasing a DMD DLP chip for under $230.






  1. Kim Velman

    I’ve had my TV for 6 years. All of a sudden it had two white spots on it and now it has about 50.

    1. Shelagh McNally

      Hi Kim
      That’s definitely a T-CON board. What is your model?

  2. Hi, a lot of folks are gutting cheap DLP projectors to turn into 3D resin printers.
    I found that the average used one often has about a one in ten chance of having at least one stuck pixel in addition to the usual broken lamp issues.
    Its possible to fix without replacing the DLP in some cases, there are four important patents issued just after these hit the market.

    1. Shelagh McNally

      Hey Andre,
      This sounds like an interesting turn of events. What’s involved to flip your DLP projector onto a 3D resin printer. Seems complicated but fun. Good use for all those old projectors kicking around and off to the landfills.

Leave A Comment?