Compatible projectors with Epson ELPLP 25 lamp

epson-elp-lp25-enc-5

Find out which projectors are compatible with the Epson ELPLP 25 and how to install the new lamp in the projectors.

Your Epson ELPLP 25 lamp will last up to 3000 hours based on the projector settings. Look for the seal of approval when you buy from an authentic manufacturer.

6 reasons to buy authentic and avoid generics

Protect yourself from buying counterfeit lamps.

End of life warning signs Epson ELPLP 25 lamp

When it’s approaching end of life there will be some distinct signs that the Epson ELPLP 25 needs to be replaced:

  • Dark image
  • Image that has deteriorated
  • “Replace the Lamp” warning message appears on screen
  • Lamp light flashes orange and then red

Compatible projectors with the Epson ELPLP 25 lamp

The Epson ELPLP 25 lamp is compatible with the following Epson projectors:

Epson PowerLite S1, Epson EMP-S1, Epson EMP-TW10, Epson V11H128020

 

For step-by-step instructions on replacing your Epson ELPLP 25 lamp, click on your projector listed below:

 

Epson_EMP-PowerLite S1_projector_Epson_ELPLP_25_lamp

Click here for step-by-step instructions on how to change the Epson ELPLP 25 projector lamp for the Epson PowerLite S1 projector.

 

 

 

 

 

Epson_EMP-S1_projector_Epson_ELPLP_25_lamp

Click here for step-by-step instructions on how to change the Epson ELPLP 25 projector lamp for the Epson EMP-S1 projector.

 

 

 

 

 

Epson_EMP-TW10_projector_Epson_ELPLP_25_lamp

Click here for step-by-step instructions on how to change the Epson ELPLP 25 projector lamp for the Epson EMP-TW10 projector.

 

 

 

 

 

Epson_EMP-PowerLite S1_projector_Epson_ELPLP_25_lamp

Click here for step-by-step instructions on how to change the Epson ELPLP 25 projector lamp for the Epson V11H128020 projector.

 

 

 

How to extend the life of the Epson ELPLP 25 lamp:

Extend the life of the newly installed Epson ELPLP 25 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson projectors and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low or Econo Mode to extend lamp life.
  • Learn more with Top tips for extending DLP projector lamp life.

 

Leave A Comment?