How to change the lamp in the Epson EMP-1707

epson_emp-1707_projector_epson_ELPLP38_lampIs your projector image dim or the colours deteoriating? It may be time to replace the Epson ELPLP38 lamp in our Epson EMP-1707. This guide will give you step-by-step instructions for quick and easy replacement.

Buy the right lamp

What’s the difference between an authentic Epson ELPLP38 and a generic lamp? Quality, price and reliability! Buy an authentic lamp from a recognized dealer who proudly displays the seal of approval.

6 reasons to avoid generic lamps

Read about how generics pose as authentic lamps.

Replacing the Epson ELPLP38 lamp

Before installation follow these important safety tips:

  • Turn power button off and after the Epson EMP-1707 has beeped twice unplug the power cord.
  • The Epson EMP-1707 should be cool to the touch. DO NOT attempt to change the Epson ELPLP38 if the projector is still hot. You can be badly burned if you don’t wait for the projector to cool.

IMPORTANT: Do not operate the projectors the lamps is removed as this may result in malfunctions, fire hazard and other accidents.

 

Epson_EMP-1707_remove_cover_screws_Epson_ELPLP38

Loosen the screws on the Epson EMP-1707 projector using the screwdriver provided.

 

 

 

 

 

 

Epson_EMP-1707_remove_cover_Epson_ELPLP38

Slide the cover towards you until it’s off the runners. Lift and remove the cover on the Epson EMP-1707 projector.

 

 

 

 

 

Epson_EMP-1707_loosen_screws_Epson_ELPLP38

 

Loosen the two screws holding the Epson ELPLP38 lamp in place.

 

 

 

 

 

Epson_EMP-1707_remove_lamp_Epson_ELPLP38

 

Grab the side indents and gently lift the Epson ELPLP38 lamp out of the Epson EMP-1707 projector. Don’t use excessive force or the lamp could break. Read about what to do if lamp breaks inside the projector.

NOTE: The Epson ELPLP38 lamp contains mercury and needs to be properly recycled. Don’t thrown the used lamp into your regular garbage. Contact your authentic manufacturer and they can assist you in getting the lamp to the right recycling facility.

 

Epson_EMP-1707_install_lamp_epson_ELPLP38

 

Gently insert the new Epson ELPLP38 lamp into the Epson EMP-1707 projector. Avoid touching the actual lamp since your fingerprints will cause black out spots to appear when the projector starts working.

 

 

 

 

Epson_EMP-1707_tighten_lamp_screws_epson_ELPLP38

 

Tighten the screws on the Epson ELPLP38 lamp. Be sure not to tighten too much or the lamp may not work.

 

 

 

 

 

Epson_EMP-1707_install_cover_Epson_ELPLP38

 

Replace the Epson EMP-1707 projector lamp cover and tighten the screw on the lamp cover.

You are now ready to reset the lamp timer.

 

 

 

Resetting the Epson EMP-1707 Lamp Timer

It’s important to reset the Epson EMP-1707 has a lamp timer each time a new lamp is installed so the projector can accurately track the Epson ELPLP38. Never use the Epson ELPLP38 lamp beyond its recommended usage as this can damage the Epson EMP-1707 projector beyond repair.

 

Epson_EMP-1707_reset_lamp_timer_Epson_ELPLP38

  • Press the MENU button on either the remote control or on the projector’s control panel.
  • Scroll down to the RESET option. Press Enter to bring up the reset screen.
  • Scroll down to RESET LAMP HOURS.
  • A second prompt screen will appear asking for confirmation. Scroll over to the YES option. Press ENTER.
  • Press MENU to exit.

 

Extending the life of your Epson ELPLP38 lamp

Follow this simple tips to make your Epson ELPLP38 lamp last even longer:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson EMP-1707 projector and let it stand for at least one hour ever 24 hours.
  • An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low.
  • Learn more with Top tips for extending DLP projector lamp life

2 Comments

  1. Mathi

    I have an epson emp-1707. Replaced the lamp and when turning on the power button turns green and after a few seconds the word lamp turns red. No light coming out of the lense. Second bulb I have tried.

    1. Shelagh McNally

      Hi Mathi,
      Have you tried resetting the lamp timer to zero. That can cause the projector not to turn on when the lamp has been changed.

Leave A Comment?