Lifespan of the Sanyo L600-0068 projector lamp

Sanyo_L600-0068Find projectors compatible with the Sanyo L600-0068 (610-282-2755) projector lamp.

You can expect between 1,000 to 3,000 hours of use from the Sanyo L600-0068 (service part number 610-282-2755) when installed properly.

The life cycle of this projector lamp depends on how much the projector is used and whether the air filters have been cleaned regularly.

Compatible models:

Scroll down for links to step-by-step instructions on replacing the Sanyo L600-0068 (610-282-2755) lamps for each of these projectors.

When it’s time to replace the Sanyo L600-0068 (610-282-2755), your projector’s Lamp Replacement Indicator will turn orange. Be sure to buy an genuine projector lamp. It’s worth paying the few extra dollars to be guaranteed a projector lamp that will work and will keep your warranty intact. Avoid knock-offs since they use inferior materials that can damage your projector. If the price of your lamp seems too good to be true–WALK away. The few dollars you save from a generic knock-off are not worth the savings since these lamps don’t last as long as the genuine lamps, can explode inside the projector, void your warranty.

For step-by-step instructions on replacing your Sanyo L600-0068 lamp, click on your model listed below:

Sanyo PLC-XP17 projector, Sanyo POA-LMP24 (service part no 610 282 2755)
Sanyo PLC-XP17

 

Click here for step-by-step instructions on how to change the Sanyo L600-0068 (610-282-2755)projector lamp for the Sanyo PLC-XP17 projector.

 

 

 

Sanyo PLC-XP18 projector, Sanyo POA-LMP24 (service part no 610 282 2755)
Sanyo PLC-XP18 projector

 

 

Click here for step-by-step instructions on how to change the Sanyo L600-0068 (610-282-2755) projector lamp for the Sanyo PLC-XP18 projector.

 

 

 

 

 

Sanyo PLC-XP20 projector, Sanyo POA-LMP24 (service part no 610 282 2755)
Sanyo PLC-XP20 projector

 

Click here for step-by-step instructions on how to change the Sanyo L600-0068 (610-282-2755)projector lamp for the Sanyo PLC-XP20 projector.

 

 

 

Sanyo PLC-XP21 projector, Sanyo POA-LMP24 (service part no 610 282 2755)
Sanyo PLC-XP21 projector

 

 

Click here for step-by-step instructions on how to change the Sanyo L600-0068 (610-282-2755)projector lamp for the Sanyo PLC-XP21 projector.

Leave A Comment?