Replacement lamp for Sony KDF-46E2000 LCD TV

Sony_KDF-46E2000_RPTV_Sony_XL-2400_projector_lampIt’s a breeze to change your Sony KDF-46E2000 LCD TV projection lamp. Just follow these step-by-step instructions.

When to replace?

Depending on how you use your Sony KDF-46E2000 TV, you should get about 8,000 hours from the projection lamp. When the Sony KDF-46E2000 lamp is reaching end of life, a replacement warning message appears on and the Lamp indicator on the TV starts flashing. You may hear a noticeable popping and this is normal. Other warning signs include poor color and a dim screen.

Get better quality with an authentic lamp

Don’t settle for anything but the best for your Sony KDF-46E2000 LCD TV. That means avoiding generics that can damaged the sensitive components in this sophisticated machihne. Look for the seal of approval — don’t get caught with a copycat generic projector lamp! Learn to spot lamps posing as authentic lamps.

6 reasons to avoid generic projection lamps:

The Sony KDF-46E2000 LCD TV uses the Sony XL-2400 (F-9308-750-0) projection lamp.

Installing a new Sony KDF-46E2000 LCD projection lamp

Perform there safety steps before installing the new lamp:

  • Turn off the power on the main unit.
  • The cooling fan will continue to operate for two minutes after the power is turned off.
  • Wait several minutes before unplugging the power cord.
  • Wait an additional 30 minutes to allow the lamp to cool down. The lamp operates under extreme so avoid touching it before changing the lamp.

Sony_KDF-46E2000_LCD_Sony_XL-2400_replace_projection_lampTake the new Sony XL-2400 projection lamp out of the box. Don’t shake the lamp as vibrations can damage the lamp. Avoiding touching the glass portion on the lamp as the oil from your fingers can burn black marks on the lamp.

Sony_KDF-46E2000_LCD_Sony_XL-2400_projector_lamp_open_doorRemove the outside Sony XL-2400 projection lamp cover. Turn the knob counterclockwise to open. Pull out the cover.

 

Sony_KDF-46E2000_LCD_Sony_XL-2400_Remove_projector_lamp_cover

Pull out the Sony XL-2400 projection lamp by first hooking a finger through the loop of the lamp handle and pulling the handle upwards. Then pull the Sony XL-2400 lamp straight out.

Sony_KDF-46E2000_LCD_Sony_XL-2400_projector_lampPut the new Sony XL-2400 projection lamp into its place. Mount the new lamp securely or the self-diagnostic function will be triggered. A loose lamp can also cause the screen to go dark.

Sony_KDF-46E2000_LCD_Sony_XL-2400_replace_projection_lamp_cover

Reattach the Sony KDF-42E2000 LCD TV lamp door. Turn the knob back to CLOSE and secure the cover

 

Green your Sony KDF-46E2000 LCD TV

Sanyo_XL-2400_projector_bulb_replacement_video

 

If you interested in going green with your Sony KDF-46E2000 LCD TV, you can replace only the projection bulb and re-used the plastic casing. This can save your money plus help reduce waste by recycling. Watch our training video to learn more.

 

 

 

 

 

Leave A Comment?